In-situ Dust and Flow Analysers
Over the past 40 years, ENVEA UK has pioneered and developed a full range of dust measurement technologies which have proven to be the basis of innovative, reliable, accurate and traceable instruments for continuous particulate emission measurement. Each technology has particular strengths making it suitable for specific process conditions found in industrial applications.
In-Situ Dust/Opacity Analyser
QAL260: MCERTS QAL1 approved, stand alone or multi-sensor Back-Scatter Particulate CEM providing high quality emission measurement for low dust concentrations from dry industrial processes
Stack602: TÜV approved DynamicOpacity™ particulate monitor for emission measurement of dust from large dry industrial processes including Baghouses and Electrostatic Precipitators
Stack710: QAL1 approved particulate CEM which meets US EPA PS-1 requirements for Opacity monitoring from combustion stacks. Robust multi corner cube reflector provides truer reflection of transmitted light compared to traditional “mirror type” reflectors providing greater confidence in measurement
QAL181: QAL1 Approved ProScatter™ particulate CEM providing high quality emission measurement of low dust concentrations from dry industrial processes. QAL181 provides 4 QAL1 certified ranges, including 0 – 7.5 mg/m3, the lowest achievable for any PM-CEM
QAL 182WS Wet Stack Extractive Analyser
Stack 182WS: US EPA PS11 capable ProScatter™ particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams.
QAL 182WS: QAL1 approved ProScatter™ particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams
Continuous Particulate Monitoring for saturated wet stack applications typically found after wet FGDs or filtration systems that produce a wet/condensing flue gas (wet ESPs/scrubbers). It comes with extractive sampling system configurable for fixed velocity or isokinetic variable flow rate sampling.
CEMS Flow Meters
Continuous flow measurement which facilitates stack velocity, volumetric flow and pollutant mass release calculations when linked to gas and dust CEMS.
STACKFLOW 200 is an Approved Flue Gas Velocity CEM for stack velocity, volumetric flow and pollutant mass release calculations when linked to Gas and Dust CEMS
MCERTS & TÜV (UBA) certified to EN15267-3
QAL1 as defined by EN14181
QAL3 compliance to EN14181
Complies with US EPA PS-6